3D Printing: The Materials Used for 3D Printing

May 30, 2018

industry

Comments Off on 3D Printing: The Materials Used for 3D Printing


3D printing was developed back in the early 80s but it has seen much growth since the past 10 years. It has now become one of the biggest growth areas in the tech industry and is revolutionising manufacturing covering every industry possible. The 3D printing business is now multi-billion dollar industry and is likely to continue growing at an exponential rate.

3D printing is quite a simple process conceptually, the printers work by printing the chosen material in layers on top of each other, with each layer setting prior to the next pass of the printer.

3D printers have been used to print all sorts of materials from cheap and normal materials to things you would expect to read in a sci-fi book.

For the consumer market, plastics are used exclusively as the materials are cheap to buy, but more importantly, the technology required to print plastic is relatively simple and low cost.

Low-cost 3D printers using plastic tend to use Fused filament fabrication (FFF). This is basically a process where a cord of plastic is heated up to become pliable then fed through the machine layering the plastic. The machines generally use one of the following plastics

PLA (Polylactic Acid) – PLA is probably the easiest material to work with when you first start 3D printing. It is an environmentally friendly material that is very safe to use, as it is a biodegradable thermoplastic that has been derived from renewable resources such as corn starch and sugar canes. This is a similar plastic that is used in compostable bags which safely bio degrade compared to more traditional plastics used in Poly Bags.

ABS (Acrylonitrile butadiene styrene) – ABS is considered to be the second easiest material to work with when you start 3D printing. It’s very safe and strong and widely used for things like car bumpers, and Lego (the kid’s toy).

PVA (Polyvinyl Alcohol Plastic) – PVA plastic which is quite different to PVA Glue (please don’t try putting PVA Glue into your 3D Printer, it definitely won’t work). The popular MakerBot Replicator 2 printers use PVA plastic.

Plastics are used extensively on all levels from consumer to businesses prototyping new products. However, in the business market, there is a huge demand for metal 3D printing. Some printers can use powdered material that is then heated to create a solid. This method is typically Direct Metal Laser Sintering (DMLS) and this particular technique is why we don’t see consumer metal 3D printing. DMLS requires a huge amount of heat and giant expensive printers to sinter the material together, and while 3D printing a metal object might be expensive compared to mass production, it is incredibly cost efficient for complex and expensive projects. A good example of DMLS based 3D printing is GE Aviation using it to produce 35,000 fuel injectors for its LEAP jet engine.

Using boring materials such as metal is almost archaic in the world of 3D printing now; some companies now do 3D bioprinting which is the process of creating cell patterns in a confined space using 3D printing technologies, where cell function and viability are preserved within the printed construct. These 3D bioprinters have the capacity to print skin tissue, heart tissue, and blood vessels among other basic tissues that could be suitable for surgical therapy and transplantation.